DUOTONE Leash

1750 DESCRIPTION The Universal ALU foil set is the tool to enter the exhilarating foil dimension. You can switch the use of this phenomenal set from Wing, to Surf, to SUP, to Kite foiling without the need to change your hydrofoil! This hydrofoil is capable of speeding up the learning process as you never thought was possible.The new Universal SW alu is available in two versions with 75 cm or 85 cm aluminum mast. The 75 cm mast is recommended to better keep control during your first flights, while the 85 cm mast is preferable once you progress and are able to ride for longer distances.The new Universal SW 1750 full carbon front wing is the engine of the whole system. Its generous wingspan and thicker profile will create the right lift to start foiling at low board speed and help to keep stability and control once you are flying! Your jibes and tacks are going to be so easy and you will learn how to pump on flat water or ground small swell. The rear wing is 52 cm wide and has a negative dihedral angle of -26°. This angled wing design improves the “pumping” and carving ability of the foil. This hydrofoil is capable of speeding up the learning process as you never thought was possible! Recommended for novice riders, the ideal hydrofoil for schools. UNIVERSAL SW ALU 1750 – 75 DELIVERED WITH: UNIVERSAL ALU MAST  75 WITH PLATE and EVA COVER Y26 UNIVERSAL FULL CARBON FRONT WING 98/1750 with PADDED COVER Y26 UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26 FUSELAGE 76 with EVA COVER Y26 M8 TORX SCREWS & KEY SET M6 TELESCOPE SCREWS & KEY SET UNIVERSAL SW ALU 1750 – 85 DELIVERED WITH: UNIVERSAL ALU MAST  85 WITH PLATE and EVA COVER Y26 UNIVERSAL FULL CARBON FRONT WING 98/1750 with PADDED COVER Y26 UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26 FUSELAGE 76 with EVA COVER Y26 M8 TORX SCREWS & KEY SET M6 TELESCOPE SCREWS & KEY SET DESCRIPTION The Universal ALU foil set is the tool to enter the exhilarating foil dimension. You can switch the use of this phenomenal set from Wing, to Surf, to SUP, to Kite foiling without the need to change your hydrofoil! This hydrofoil is capable of speeding up the learning process as you never thought was possible.The new Universal SW alu is available in two versions with 75 cm or 85 cm aluminum mast. The 75 cm mast is recommended to better keep control during your first flights, while the 85 cm mast is preferable once you progress and are able to ride for longer distances.The new Universal carbon front wing 2400 is your ticket to learn how to fly in literally no time and with the lightest wind. Its large and generous dimensions with extra thick profile will let you take off with ease and learn your first jibes and tacks. The rear wing is 52 cm wide and has a negative dihedral to improve the “pumping” and carving ability of the foil. Recommended for novice heavy weight riders, the ideal hydrofoil for schools. UNIVERSAL SW ALU 2400 – 75 DELIVERED WITH: UNIVERSAL ALU MAST  75 WITH PLATE and EVA COVER Y26 UNIVERSAL FULL CARBON FRONT WING 110/2400 with PADDED COVER Y26 UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26 FUSELAGE 76 with EVA COVER Y26 M8 TORX SCREWS & KEY SET M6 TELESCOPE SCREWS & KEY SET   UNIVERSAL SW ALU 2400 – 85 DELIVERED WITH: UNIVERSAL ALU MAST  85 WITH PLATE and EVA COVER Y26 UNIVERSAL FULL CARBON FRONT WING 110/2400 with PADDED COVER Y26 UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26 FUSELAGE 76 with EVA COVER Y26 M8 TORX SCREWS & KEY SET M6 TELESCOPE SCREWS & KEY SET

MANTIS HIGH PERFORMANCE SIZES: 2M / 2.5M / 3M / 3.5M / 4M / 4.5M / 5M / 6M The gold standard in winging is back with its 4th generation design.  Crafted for those who demand the best, the Mantis V4 is the pinnacle of stability, power and feel. With a focus being made towards power distribution and torsional control and cleanliness, the 04 Mantis marks the biggest evolutionary step for this iconic wing. The new spanwise load path panel layout, combined with the graduated TE load patch, make this the cleanest and highest performing Mantis to date. *Includes:  Bag, repair kit and stickers. High rigidity LE Inflatable, Low Dihedral with powerful profile, Medium AR and convex strut.   FEATURES: NEW:  Convex strut for improved frame stiffness and extended TE canopy support NEW:  Graduated TE load distribution panel for improved efficiency of the loaded sail NEW:  refined airfoil flow NEW:  spanwise load path panel layout NEW:  Fully moulded composite widespan handles with indexing mounting interface. NEW:  Full rigid performance LE handle with anti-abrasion patch NEW:  2-ply frame elbow panels for improved arc rigidity NEW:  Fine tuned size progressive wing tip twist for forgiving sheeting High Tenacity Dacron for enhanced dihedral stability and improved handling characteristics. Heavy duty UHMPWE reinforced closing seam construction Nano Ripstop Canopy, the benchmark in durability, stability and responsiveness Sprint 3.0 and deflate valve Durable TPU bumpers 2-ply high rigidity centre load reinforcement for added arc and dihedral stability Refined convex dihedral for power-to-stability ratio Refined airfoil centre section for low end power

Dedicated coiled leash for wingsurfing with wristleashFeatures: Wingsurf coiled wristleash

The Pro Footstraps feature 7mm neoprene padding for maximum comfort, even during the most intense rides. The cushioning ensures that your feet are protected while you're on the water, making these footstraps ideal for any water sports enthusiast. These footstraps also come with an external adjustment system that allows for customized fitment. You can easily adjust the straps to fit your unique body shape and size, ensuring maximum comfort and support. This feature also ensures that the footstraps can be shared among different riders, making them ideal for rental or demo boards. MATERIALS: 7mm Neoprene paddingFEATURES:Pre-formed arch prevents collapsing7mm Neoprene paddingExternal adjustment systemSingle or double insert compatibilityExcellent for rentals/demos

The crossover board that blends wave riding and twintip performance The Reedin Snackpack was created to remove the need to choose between a surfboard and a twintip. This volume board crosses the boundaries between traditional directionals and twintips, giving you one board that can ride waves, charge through chop and still send big jumps on the way out. Built to ride waves and boost big The unique shape combines the outline, rail and rocker characteristics of a surfboard with the bidirectional concept of a twintip. This creates strong drive through bottom turns, lets you hit the lip with confidence and still allows you to edge hard, hold power and launch off kickers like on a regular twintip. The Snackpack is designed to keep grip and control even at speed, making high-speed landings surprisingly stable. At the same time, it flies over chop with ease and opens up a completely different way of reading and riding the ocean. Easy handling with a familiar feel Twintip riders will feel at home on the Snackpack almost immediately. It makes going over chop, bigger waves and riding upwind even easier than on a regular twintip, while delivering a more surf-oriented carving sensation in turns. The board is built to let you ride both incoming waves and outgoing kickers in the same session, creating a more playful and creative riding experience with endless new line options. Carbon construction for strength and responsiveness The full carbon construction gives the board a strong yet lightweight feel, built to handle everything from powerful top and bottom turns to hard, high-speed landings after big jumps. A light PVC core with strong stringers and reinforcements adds strength and durability, while keeping the board responsive under load. The step tail provides clean water release off the back of the board, and the rail edging channels on the bottom create exceptional grip for strong upwind angles and precise bottom turns. Surf-inspired rails deliver a more authentic carving feel, while the triple fin setup adds extra drive and confidence in real waves. Key features Crossover shape combining surfboard and twintip characteristics Designed for both wave riding and big jumping Easy handling with a familiar feel for twintip riders Flies over chop and handles bigger waves with ease Full carbon construction for strength, low weight and responsiveness Light PVC core with strong stringers and reinforcements Triple fin setup for extra drive in turns Step tail for clean water release Rail edging channels for natural grip and strong upwind performance Surf-inspired rails for a true surf feeling Grab rail with thumb recess for easier handling Designed for bindings Sizes and specifications 142 cm – 46.2 x 3.1 cm 146 cm – 47.5 x 3.2 cm 150 cm – 48.3 x 3.6 cm

Padded travel boardbag for your SNACKPACK or twintip The Reedin Boardbag is designed as the perfect travel companion for your SNACKPACK or twintip. With generous padding, it helps keep your board protected and damage-free on the way to your next kite session or holiday destination. Designed for practical everyday use and travel This boardbag is sized to fit your board with bindings and fins mounted, making transport easier and more convenient. Whether you are heading to your local spot or packing for a trip, it offers a simple and practical solution to keep your setup protected and ready to go. Key features Perfect travel companion for your SNACKPACK or twintip Generous padding for reliable board protection Designed to keep your board damage-free during transport Sized to fit the board with bindings and fins mounted Sizes 142 cm 146 cm 150 cm

Die Allround-Wassersport-Schutzkappe. Entwickelt mit Schutz im Sinn, ohne Kompromisse beim Stil zu machen. Die Impact Cap verfügt über einen verstellbaren Rücken- und Kinnriemen, der eine sichere und anpassbare Passform bietet. So bleibt die Kappe an Ort und Stelle, egal wie heftig der Wipeout ist. Das perforierte Ohrteil der Kappe bietet zuverlässigen Schutz vor Wasser und Wind, während es für ein klares Gehör während deiner Session sorgt. FeaturesCE approvedSlim fitBrimLight weightAdjustable chin strapVelcro fit adjustmentPerforated ear pieceFor watersports only. Read instruction manual carefullyMaterialienEVA Foam

Les Plasma Boots 6/5 Round Toe d’ION répondront aux besoins du rider au budget plus serré, mais qui ne néglige pas la qualité. Offrant un ajustement parfait et une protection contre les éléments, ION a tout mis dans une conception originale et unique. La couche en caoutchouc et néoprène épaisse de 6/5 mm des bottes te protègera des eaux glacées. De nombreuses zones des bottes ont été repensées, et les Plasma Boots 6/5 Round Toe possèdent une semelle segmentée pour améliorer la flexibilité sur des zones cruciales du pied. Des renforts en caoutchouc viennent compléter les bottes à des zones sensibles de la cheville et la nouvelle Pull_Loop permet de mettre et d’enlever ces chaussures encore plus facilement.          

Ultra-thin high-performance carbon mast for maximum glide, speed and direct control The F-ONE UHM Carbon Mast 12 is crafted for riders who demand the very best in glide and performance. Developed with an ultra-thin profile and a highly refined construction, this mast is built to maximize speed, efficiency and direct control across demanding foil disciplines. Ultra-thin profile for exceptional glide and top-end speed With a profile measuring just 12 mm at its thinnest point, this mast is designed to minimize drag and maximize glide. Its tapered chord and thickness make it slightly wider and thicker at the top before narrowing toward the fuselage, creating a shape that helps generate more speed and efficiency on the water. This ultra-thin design makes it especially effective for downwind runs, high-speed wing foiling and kite foiling, while also helping riders gain more pop and height during tricks. UHM Carbon layup for increased rigidity and precision The custom Ultra High Modulus (UHM) Carbon layup makes this mast 25% stiffer in bending than the HM Carbon 14 mast. This provides exceptional rigidity and more precise control in both bending and torsion, resulting in a very direct feel underfoot and excellent maneuverability. The UHM Carbon fiber layup is also 1.2x stiffer than High Modulus Carbon and 1.8x stiffer than regular carbon fiber, giving this mast the structural performance needed for such a thin profile. Advanced one-piece construction with optimized internal structure Molded and cured in a single shot from carbon pre-preg, the one-piece construction integrates F-ONE’s optimized SPINE internal structure. This enhances rigidity, efficiency and control, especially through turns, while delivering a higher level of stiffness, precision and overall performance. The use of pre-preg technology ensures an optimized epoxy-to-carbon ratio, resulting in a lighter, stiffer and stronger construction with excellent durability. New TITAN 2 connection and updated top plate The mast features the new top plate and updated TITAN 2 mast foot at the bottom. The redesigned top plate is compatible with lockable T-nuts and includes the keyhole-shaped Quick-Attach System for faster assembly. The TITAN 2 connection improves structural efficiency, rigidity and reliability at the mast-to-foil connection. Built around a reinforced structure using only two M8 screws, it delivers a more direct feel, improved pumping and a stronger foil connection while maintaining excellent hydrodynamic performance. This mast is compatible with virtually all boards on the market featuring the Twin-Tracks system and with all front wings using the TITAN 2 connection. Key features Ultra-thin 12 mm profile Maximum glide and speed Increased rigidity for a direct feel and total control Custom Ultra High Modulus Carbon layup 25% stiffer in bending than the HM Carbon 14 mast Optimized SPINE technology for rigidity, efficiency and control One-piece carbon pre-preg construction New top plate with Quick-Attach System TITAN 2 connection for better structural efficiency and a more direct feel Compatible with Twin-Tracks boards and TITAN 2 front wings Program Efficiency / Glide: 100% Bending Stiffness: 95% Torsion Stiffness: 65% Sizes 75 cm 80 cm 85 cm 95 cm Sold with Three-piece soft cover 4x M6-25 mm tapered head screws 4x T-Nuts M6 User Guide